{"product_id":"printed-2-into-1-merges","title":"Printed 2 into 1 Merges: 3D Printed 316L Stainless Merge Collectors, 2in to 4in","description":"\u003ch2\u003ePrinted 2 into 1 Merges: 316L Stainless\u003c\/h2\u003e\n\u003cp\u003eA fabrication component to cut labor and speed up production. Each merge takes two inlets into one outlet in a single metal 3D printed piece of 316L stainless, so the hard part of a 2 into 1 collector is already done. Cut and fit your tube, butt weld it to the merge, and move on.\u003c\/p\u003e\n\u003ch3\u003eBuilt for fabricators\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo inlets merge into one outlet at a 45 degree included angle, 22.5 degrees each side.\u003c\/li\u003e\n\u003cli\u003eRounded inside crotch where the two inlets meet.\u003c\/li\u003e\n\u003cli\u003eBody wall is 0.049in.\u003c\/li\u003e\n\u003cli\u003eWeld ends are thickened to 0.065in (a step on the inside) to butt weld to 16 ga tube: the last 0.30in of each inlet and the last 0.20in of the outlet.\u003c\/li\u003e\n\u003cli\u003eStraight 0.30in weld stub on the outlet.\u003c\/li\u003e\n\u003cli\u003eSeven sizes from 2 x 2in into 2in up to 2 x 4in into 4in, including 2 x 2in into 2.5in and 2 x 2.5in into 3in step ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2 x 2.5in into 3in (MG-250-300):\u003c\/strong\u003e the inlets are short and cut just past where they meet, like a hand built merge, so the inlet ends are the plain 0.049in body wall. Only the outlet has the 0.065in weld end.\u003c\/p\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003eOverall size of each merge: width across the inlets, height from the outlet end to the inlet ends, and depth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 2in into 2in:\u003c\/strong\u003e 4.08in wide x 4.13in tall x 2.01in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 2in into 2.5in:\u003c\/strong\u003e 4.08in wide x 4.56in tall x 2.51in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 2.5in into 2.5in:\u003c\/strong\u003e 5.00in wide x 4.78in tall x 2.51in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 2.5in into 3in:\u003c\/strong\u003e 4.74in wide x 4.72in tall x 3.01in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 3in into 3in:\u003c\/strong\u003e 5.93in wide x 5.44in tall x 3.01in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 3.5in into 3.5in:\u003c\/strong\u003e 6.85in wide x 6.09in tall x 3.52in deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 4in into 4in:\u003c\/strong\u003e 7.78in wide x 6.77in tall x 4.02in deep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eOne 2 into 1 merge in the size you pick.\u003c\/p\u003e\n\u003ch3\u003eInstall notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeld on part. Butt weld your tube to the two inlets and the outlet, matching each OD.\u003c\/li\u003e\n\u003cli\u003eThe thickened ends are made for 0.065 wall (16 ga) tube.\u003c\/li\u003e\n\u003cli\u003eProfessional welding recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated printed parts\u003c\/h3\u003e\n\u003cp\u003eBuilding a full system? See the \u003ca href=\"\/products\/printed-cope-junctions\"\u003eprinted cope junctions\u003c\/a\u003e for laterals and T junctions, the \u003ca href=\"\/products\/tight-radius-elbows-075d\"\u003e0.75D tight radius elbows\u003c\/a\u003e for tight bends, the \u003ca href=\"\/products\/twin-tip-splitters\"\u003etwin tip splitters\u003c\/a\u003e for a 1 into 2 split, and the full \u003ca href=\"\/collections\/3d-printed-stainless-exhaust-parts\"\u003e3D printed stainless exhaust parts\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eBuy the STEP file, $11\u003c\/h3\u003e\n\u003cp\u003eWant to print it yourself? Pick \u003cstrong\u003eSTEP file\u003c\/strong\u003e under Format and you get the same 3D model we send to our printing partner, in the size you chose. The download link comes right after checkout and nothing ships. Upload it to any online metal 3D printing service for your own quote.\u003c\/p\u003e\n\u003cp\u003eThe file is yours to use however you want. It is designed for 316L stainless.\u003c\/p\u003e\n\u003cp\u003eParts printed by someone else are not covered by our warranty. Digital files are non-refundable.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003ePrinted to order. Allow about 4 weeks before it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road and competition use.\u003c\/strong\u003e Buyer is responsible for following all local exhaust and noise laws.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDesigned by Brockett Built in central Illinois. Printed by an outside metal printing partner.\u003c\/em\u003e\u003c\/p\u003e","brand":"Brockett Built","offers":[{"title":"2 x 2in into 2in \/ Printed part","offer_id":45214803165392,"sku":"MG-200-200","price":50.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2in into 2.5in \/ Printed part","offer_id":45214803198160,"sku":"MG-200-250","price":58.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2.5in into 2.5in \/ Printed part","offer_id":45214803230928,"sku":"MG-250-250","price":73.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2.5in into 3in \/ Printed part","offer_id":45214803263696,"sku":"MG-250-300","price":70.0,"currency_code":"USD","in_stock":true},{"title":"2 x 3in into 3in \/ Printed part","offer_id":45214803296464,"sku":"MG-300-300","price":102.0,"currency_code":"USD","in_stock":true},{"title":"2 x 3.5in into 3.5in \/ Printed part","offer_id":45214803329232,"sku":"MG-350-350","price":135.0,"currency_code":"USD","in_stock":true},{"title":"2 x 4in into 4in \/ Printed part","offer_id":45214803362000,"sku":"MG-400-400","price":175.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2in into 2in \/ STEP file","offer_id":45219297394896,"sku":"MG-200-200-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2in into 2.5in \/ STEP file","offer_id":45219297427664,"sku":"MG-200-250-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2.5in into 2.5in \/ STEP file","offer_id":45219297460432,"sku":"MG-250-250-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 2.5in into 3in \/ STEP file","offer_id":45219297493200,"sku":"MG-250-300-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 3in into 3in \/ STEP file","offer_id":45219297525968,"sku":"MG-300-300-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 3.5in into 3.5in \/ STEP file","offer_id":45219297558736,"sku":"MG-350-350-STEP","price":11.0,"currency_code":"USD","in_stock":true},{"title":"2 x 4in into 4in \/ STEP file","offer_id":45219297591504,"sku":"MG-400-400-STEP","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/0818\/6832\/files\/printed-2-into-1-merge-mg-300-300-isometric.jpg?v=1791852206","url":"https:\/\/brockettbuilt.com\/products\/printed-2-into-1-merges","provider":"Brockett Built","version":"1.0","type":"link"}